Tutorial: Making of "A Passage" by Pradipta Seth , India



All the modeling in the scene was done using 3ds max 6. For texturing I used around 20-25 medium resolution pictures and combined them in Photoshop. Light Tracer was used for the rendering.

My intention was to create a work that depicts my love for art. This is not very detailed scene and modeling wise it takes only few hours to get the stage set. But, lighting and texturing is very important to convey the meaning of the image. I was inspired by a painting I saw in book few months back. I was so moved by it that I drew a sketch in my drawing pad later that evening. It ended up something like the one I attached below.


That painting depicts a lonely corridor running in between two walls, staying neglected for ages and stood guarded by two dampen walls.

A staircase at the end of the corridor also serves a special meaning. The scene ends there but it gives kind of suspense feeling as to what lies after that. In this sense the scene makes someone to think a lot.

Modeling

Modeling this scene involved very little time. But to get the concept and idea to the drawing board took longer than actual modeling.

I started with a box and converted it to poly and made the two main walls on the right side. These are the walls where most of the drama will take place. I was very particular in the height and their joining angle. I used a camera from the beginning to determine the exact placement, since; the angle will play a major role. As you can see in the picture below the placement of the walls and how the camera is placed. I also added a ground.



Then I modeled the top portion of the wall using same poly modeling method. I also used Tessellate command and noise modifier to make the edge more random. The picture below shows the close up.


Then I turned my attention to the wall on the left side that will make it impossible to see the other side of the scene. Although very small part of this wall is actually seen from the camera angle but it serves as a barrier between the passage and the light source.


I had to add light source at this point to determine the exact light and shadow angle and made adjustment to the height and orientation of the wall.

The following picture shows how the wall is actually placed and the light source behind it.



Next I was concentrating on making the backdrop. The backdrop has to be interesting enough to catch the attention and at the same time should convey the basic meaning the image in proper synchronization. I did lots of experiment before coming to make this object. The wall is placed in such way so that it shows the two windows from the camera angle. This picture shows the walls of a building positioned in the scene.


The next picture shows a close up of the window with shutters like we have in old buildings built around the first quarter of 20th century.


Next I added the staircase at the end of the corridor. The edge is again made random and rounded to showcase the weathering and aging.


When I was almost satisfied with the scene setup I added some pot with plants and wooden planks near the wall. The picture below shows a close up of the pots, one broken partly.