Step 10: For this part you can use the line and circle. Work similar to step 6, 7, 8. Then like step 6 create this part. Oooh delete the polygon under the model.






Step 11: Create a chamfer box again with these parameters.

Length: 2.5
Width: 3.8
Height: 0.1
Fillet: 0.8

Then Go to Editable poly and change your model like this picture. You should use the outline and extrude (0.3 or 0.5)

Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7